[c-nsp] Bus error when going to 12.2.26
Rodney Dunn
rodunn at cisco.com
Mon Nov 8 16:43:22 EST 2004
I'd probably try upgrading that if I were you given
it was build back in 1999. :)
Rodney
On Mon, Nov 08, 2004 at 03:40:06PM -0600, Brian Feeny wrote:
>
>
> lone-ds3-hub1#show version
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-P-M), Version 12.2(26), RELEASE SOFTWARE
> (fc2)
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Sat 31-Jul-04 01:26 by eaarmas
> Image text-base: 0x60008940, data-base: 0x610E8000
>
> ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE
> (fc1)
>
> lone-ds3-hub1 uptime is 5 days, 14 hours, 33 minutes
> System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
> System restarted at 07:05:06 UTC Wed Nov 3 2004
> System image file is "slot0:c7200-p-mz.122-26.bin"
>
> lone-ds3-hub1#show bootvar
> BOOT variable = slot0:c7200-p-mz.122-26.bin,12;slot0:,12;
> CONFIG_FILE variable does not exist
> BOOTLDR variable =
> Configuration register is 0x2102
>
> lone-ds3-hub1#show bootflash:
> -#- ED ----type---- --crc--- -seek-- nlen -length-
> ---------date/time--------- name
> 1 .. image 18794911 2FB1D0 33 2863440 Aug 13 2003 20:37:08
> +00:00 bootflash-c7200-boot-mz.120-2.XE2
> 2 .. config 910D8C05 31DF94 9 142659 Nov 3 2004 07:04:15
> +00:00 crashinfo
>
>
> On Nov 8, 2004, at 3:21 PM, Rodney Dunn wrote:
>
> > This crash was in the boot image it looks like
> > because the 'sh ver' says:
> >
> >>>> lone-ds3-hub1 uptime is 2 days, 7 hours, 20 minutes
> >>>> System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
> >>>> System restarted at 07:05:06 UTC Wed Nov 3 2004
> >
> > Notice on bootup it decompresses two images.
> > a) the boot
> > then
> > b) the full IOS image
> >
> > What boot image do you have in bootflash?
> >
> > Can you confirm that it did boot up normally after the
> > crash loading the boot image?
> >
> > Rodney
> >
> >
> >
> >
> > On Fri, Nov 05, 2004 at 02:47:57PM -0600, Brian Feeny wrote:
> >>
> >> We upgraded a 7206/NPE-150 that is mostly handling a bunch of CT3's
> >> from 12.2.19 to 12.2.26
> >> and saw a bus error on reboot. Its up and working, but I was
> >> concerned
> >> about the error and if anyone
> >> could shed some light on what may be wrong.
> >>
> >> Brian
> >>
> >>
> >>>>
> >>>> -- System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE
> >>>> SOFTWARE
> >>>> (fc1)
> >>>> Copyright (c) 1994 by cisco Systems, Inc.
> >>>> C7200 processor with 131072 Kbytes of main memory
> >>>>
> >>>>
> >>>> Self decompressing the image :
> >>>> #################################################
> >>>> ####################################################################
> >>>> ##
> >>>> # #########
> >>>> ####################################################################
> >>>> ##
> >>>> # #########
> >>>> ################################################# [OK]
> >>>>
> >>>> %C7200-3-PACONFIG: Exceeds 3 high speed port adaptors
> >>>> %CT3-1-INITFAIL: Slot 4 firmware init (ct3sw_pci_init (count !=
> >>>> expected_count))
> >>>> %PA-3-DEACTIVATED: port adapter in bay [4] powered off.
> >>>> %SYS-4-CONFIG_NEWER: Configuration from version 12.2 may not be
> >>>> correctly unders
> >>>> tood
> >>>> %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to up
> >>>> %CONTROLLER-5-UPDOWN: Controller T3 2/0, changed state to up
> >>>> %ALIGN-1-FATAL: Illegal access to a low address
> >>>> addr=0x0, pc=0x60274888, ra=0x60274B7C, sp=0x6090C3A0
> >>>>
> >>>>
> >>>> === Flushing messages (07:04:15 UTC Wed Nov 3 2004) ===
> >>>>
> >>>> *** System received a Bus Error exception ***
> >>>> signal= 0xa, code= 0x40c, context= 0x6081ba20
> >>>> PC = 0x6033c890, Cause = 0x2420, Status Reg = 0x34008002
> >>>>
> >>>> System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE
> >>>> (fc1)
> >>>> Copyright (c) 1994 by cisco Systems, Inc.
> >>>> C7200 processor with 131072 Kbytes of main memory
> >>>>
> >>>>
> >>>> Self decompressing the image :
> >>>> #################################################
> >>>> ############################################################# [OK]
> >>>>
> >>>> Restricted Rights Legend
> >>>>
> >>>> Use, duplication, or disclosure by the Government is
> >>>> subject to restrictions as set forth in subparagraph
> >>>> (c) of the Commercial Computer Software - Restricted
> >>>> Rights clause at FAR sec. 52.227-19 and subparagraph
> >>>> (c) (1) (ii) of the Rights in Technical Data and Computer
> >>>> Software clause at DFARS sec. 252.227-7013.
> >>>>
> >>>> cisco Systems, Inc.
> >>>> 170 West Tasman Drive
> >>>> San Jose, California 95134-1706
> >>>>
> >>>> ------------------
> >>>>
> >>>> lone-ds3-hub1#sh ver
> >>>> Cisco Internetwork Operating System Software
> >>>> IOS (tm) 7200 Software (C7200-P-M), Version 12.2(26), RELEASE
> >>>> SOFTWARE (fc2)
> >>>> Copyright (c) 1986-2004 by cisco Systems, Inc.
> >>>> Compiled Sat 31-Jul-04 01:26 by eaarmas
> >>>> Image text-base: 0x60008940, data-base: 0x610E8000
> >>>>
> >>>> ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE
> >>>> SOFTWARE (fc1)
> >>>>
> >>>> lone-ds3-hub1 uptime is 2 days, 7 hours, 20 minutes
> >>>> System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
> >>>> System restarted at 07:05:06 UTC Wed Nov 3 2004
> >>>> System image file is "slot0:c7200-p-mz.122-26.bin"
> >>>>
> >>>> cisco 7206 (NPE150) processor (revision B) with 114688K/16384K bytes
> >>>> of memory.
> >>>> Processor board ID 16072082
> >>>> R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
> >>>> 6 slot midplane, Version 1.3
> >>>>
> >>>> Last reset from power-on
> >>>> X.25 software, Version 3.0.0.
> >>>> Bridging software.
> >>>> Primary Rate ISDN software, Version 1.1.
> >>>>
> >>>> Number of Fast PAs = 4
> >>>> Number of Fast+Medium PAs = 4
> >>>> Total number of PA bandwidth points consumed = 560
> >>>> Please refer to the following document "Cisco 7200 Series Port
> >>>> Adaptor Hardware Configuration Guidelines" on CCO <www.cisco.com>,
> >>>> for c7200 bandwidth points oversubscription/usage guidelines.
> >>>> WARNING: Number of Fast PAs Exceeds 3
> >>>>
> >>>> 1 FastEthernet/IEEE 802.3 interface(s)
> >>>> 87 Serial network interface(s)
> >>>> 4 Channelized T3 port(s)
> >>>> 125K bytes of non-volatile configuration memory.
> >>>> 1024K bytes of packet SRAM memory.
> >>>>
> >>>> 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> >>>> 46976K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
> >>>> 4096K bytes of Flash internal SIMM (Sector size 256K).
> >>>> Configuration register is 0x2102
> >>>>
> >>>> --------
> >>>>
> >>>> Ser1/0 - PA-MC-T3
> >>>> Ser2/0 - PA-MC-T3
> >>>> Ser4/0 and 4/1 - PA-MC-2T3
> >>>> Fa5/0 - PA-FE-TX
> >>>>
> >>
> >> ----------------------------------------------------------------------
> >> --
> >> ------
> >> Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
> >> Network Engineer p: 318.213.4709
> >> ShreveNet Inc. f: 318.221.6612
> >
> >
> >
> >> _______________________________________________
> >> cisco-nsp mailing list cisco-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>
> ------------------------------------------------------------------------
> ------
> Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
> Network Engineer p: 318.213.4709
> ShreveNet Inc. f: 318.221.6612
>
More information about the cisco-nsp
mailing list