[c-nsp] Bus error when going to 12.2.26
Brian Feeny
signal at shreve.net
Mon Nov 8 16:40:06 EST 2004
lone-ds3-hub1#show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-P-M), Version 12.2(26), RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 31-Jul-04 01:26 by eaarmas
Image text-base: 0x60008940, data-base: 0x610E8000
ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE
(fc1)
lone-ds3-hub1 uptime is 5 days, 14 hours, 33 minutes
System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
System restarted at 07:05:06 UTC Wed Nov 3 2004
System image file is "slot0:c7200-p-mz.122-26.bin"
lone-ds3-hub1#show bootvar
BOOT variable = slot0:c7200-p-mz.122-26.bin,12;slot0:,12;
CONFIG_FILE variable does not exist
BOOTLDR variable =
Configuration register is 0x2102
lone-ds3-hub1#show bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length-
---------date/time--------- name
1 .. image 18794911 2FB1D0 33 2863440 Aug 13 2003 20:37:08
+00:00 bootflash-c7200-boot-mz.120-2.XE2
2 .. config 910D8C05 31DF94 9 142659 Nov 3 2004 07:04:15
+00:00 crashinfo
On Nov 8, 2004, at 3:21 PM, Rodney Dunn wrote:
> This crash was in the boot image it looks like
> because the 'sh ver' says:
>
>>>> lone-ds3-hub1 uptime is 2 days, 7 hours, 20 minutes
>>>> System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
>>>> System restarted at 07:05:06 UTC Wed Nov 3 2004
>
> Notice on bootup it decompresses two images.
> a) the boot
> then
> b) the full IOS image
>
> What boot image do you have in bootflash?
>
> Can you confirm that it did boot up normally after the
> crash loading the boot image?
>
> Rodney
>
>
>
>
> On Fri, Nov 05, 2004 at 02:47:57PM -0600, Brian Feeny wrote:
>>
>> We upgraded a 7206/NPE-150 that is mostly handling a bunch of CT3's
>> from 12.2.19 to 12.2.26
>> and saw a bus error on reboot. Its up and working, but I was
>> concerned
>> about the error and if anyone
>> could shed some light on what may be wrong.
>>
>> Brian
>>
>>
>>>>
>>>> -- System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE
>>>> SOFTWARE
>>>> (fc1)
>>>> Copyright (c) 1994 by cisco Systems, Inc.
>>>> C7200 processor with 131072 Kbytes of main memory
>>>>
>>>>
>>>> Self decompressing the image :
>>>> #################################################
>>>> ####################################################################
>>>> ##
>>>> # #########
>>>> ####################################################################
>>>> ##
>>>> # #########
>>>> ################################################# [OK]
>>>>
>>>> %C7200-3-PACONFIG: Exceeds 3 high speed port adaptors
>>>> %CT3-1-INITFAIL: Slot 4 firmware init (ct3sw_pci_init (count !=
>>>> expected_count))
>>>> %PA-3-DEACTIVATED: port adapter in bay [4] powered off.
>>>> %SYS-4-CONFIG_NEWER: Configuration from version 12.2 may not be
>>>> correctly unders
>>>> tood
>>>> %CONTROLLER-5-UPDOWN: Controller T3 1/0, changed state to up
>>>> %CONTROLLER-5-UPDOWN: Controller T3 2/0, changed state to up
>>>> %ALIGN-1-FATAL: Illegal access to a low address
>>>> addr=0x0, pc=0x60274888, ra=0x60274B7C, sp=0x6090C3A0
>>>>
>>>>
>>>> === Flushing messages (07:04:15 UTC Wed Nov 3 2004) ===
>>>>
>>>> *** System received a Bus Error exception ***
>>>> signal= 0xa, code= 0x40c, context= 0x6081ba20
>>>> PC = 0x6033c890, Cause = 0x2420, Status Reg = 0x34008002
>>>>
>>>> System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE
>>>> (fc1)
>>>> Copyright (c) 1994 by cisco Systems, Inc.
>>>> C7200 processor with 131072 Kbytes of main memory
>>>>
>>>>
>>>> Self decompressing the image :
>>>> #################################################
>>>> ############################################################# [OK]
>>>>
>>>> Restricted Rights Legend
>>>>
>>>> Use, duplication, or disclosure by the Government is
>>>> subject to restrictions as set forth in subparagraph
>>>> (c) of the Commercial Computer Software - Restricted
>>>> Rights clause at FAR sec. 52.227-19 and subparagraph
>>>> (c) (1) (ii) of the Rights in Technical Data and Computer
>>>> Software clause at DFARS sec. 252.227-7013.
>>>>
>>>> cisco Systems, Inc.
>>>> 170 West Tasman Drive
>>>> San Jose, California 95134-1706
>>>>
>>>> ------------------
>>>>
>>>> lone-ds3-hub1#sh ver
>>>> Cisco Internetwork Operating System Software
>>>> IOS (tm) 7200 Software (C7200-P-M), Version 12.2(26), RELEASE
>>>> SOFTWARE (fc2)
>>>> Copyright (c) 1986-2004 by cisco Systems, Inc.
>>>> Compiled Sat 31-Jul-04 01:26 by eaarmas
>>>> Image text-base: 0x60008940, data-base: 0x610E8000
>>>>
>>>> ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE
>>>> SOFTWARE (fc1)
>>>>
>>>> lone-ds3-hub1 uptime is 2 days, 7 hours, 20 minutes
>>>> System returned to ROM by reload at 07:03:29 UTC Wed Nov 3 2004
>>>> System restarted at 07:05:06 UTC Wed Nov 3 2004
>>>> System image file is "slot0:c7200-p-mz.122-26.bin"
>>>>
>>>> cisco 7206 (NPE150) processor (revision B) with 114688K/16384K bytes
>>>> of memory.
>>>> Processor board ID 16072082
>>>> R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
>>>> 6 slot midplane, Version 1.3
>>>>
>>>> Last reset from power-on
>>>> X.25 software, Version 3.0.0.
>>>> Bridging software.
>>>> Primary Rate ISDN software, Version 1.1.
>>>>
>>>> Number of Fast PAs = 4
>>>> Number of Fast+Medium PAs = 4
>>>> Total number of PA bandwidth points consumed = 560
>>>> Please refer to the following document "Cisco 7200 Series Port
>>>> Adaptor Hardware Configuration Guidelines" on CCO <www.cisco.com>,
>>>> for c7200 bandwidth points oversubscription/usage guidelines.
>>>> WARNING: Number of Fast PAs Exceeds 3
>>>>
>>>> 1 FastEthernet/IEEE 802.3 interface(s)
>>>> 87 Serial network interface(s)
>>>> 4 Channelized T3 port(s)
>>>> 125K bytes of non-volatile configuration memory.
>>>> 1024K bytes of packet SRAM memory.
>>>>
>>>> 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
>>>> 46976K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
>>>> 4096K bytes of Flash internal SIMM (Sector size 256K).
>>>> Configuration register is 0x2102
>>>>
>>>> --------
>>>>
>>>> Ser1/0 - PA-MC-T3
>>>> Ser2/0 - PA-MC-T3
>>>> Ser4/0 and 4/1 - PA-MC-2T3
>>>> Fa5/0 - PA-FE-TX
>>>>
>>
>> ----------------------------------------------------------------------
>> --
>> ------
>> Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
>> Network Engineer p: 318.213.4709
>> ShreveNet Inc. f: 318.221.6612
>
>
>
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
------------------------------------------------------------------------
------
Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
Network Engineer p: 318.213.4709
ShreveNet Inc. f: 318.221.6612
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 186 bytes
Desc: This is a digitally signed message part
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20041108/6e77197c/PGP.bin
More information about the cisco-nsp
mailing list