[c-nsp] Cat 6509 basic monitoring via SNMP

[Dale W. Carder]

Hi Sam,

On Nov 8, 2004, at 12:37 PM, Sam Munzani wrote:
> Can somebody advise following monitoring on 6509 via SNMP? I am 
> running sup2/msfc2 with 12.2.17d.SXB4 in native mode. As per CCO the 
> NetFlow MIB is supported but snmpwalk doesn't show anything.

I would double check that NetFlow MIB really is supported in that 
version of IOS.  Depending on what you want, exporting netflow to an 
external collector may be what you're looking for anyway.  Also look at 
ciscoSwitchEngineMIB.

> I would also like to know OID for backplane utilization if anybody 
> know already.

See ciscoCat6kCrossbarMIB.

Hope this helps,
Dale

-----------------------------------------------
Dale W. Carder
Network Engineer
University of Wisconsin at Madison
http://net.doit.wisc.edu/~dwcarder