[c-nsp] Broken 7200?

[Dave Temkin]

Was this something that broke, or something that didn't work out of the
box?

Thx,
-Dave

On Fri, 12 Nov 2004, Marko Milivojevic wrote:

> > Not yet due to the larger scale impact - but I figured changing the port
> > to a different one on the switch would isolate that enough - even swapping
> > it with a known good one on the switch.
>
>     I can't withstand this feeling of deja-vu any longer :-).
>
>     We have had very similar problem with one of our 3750-7200-G1 pairs. I
> think I have done everything that made any sense (pretty much all you did +
> reloading the switch). I even tried replacing copper with fibre. The problem
> was eventually solved by upgrading 3750 to 12.2(20)SE1.
>
> Marko.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>