[c-nsp] Growing BGP tables
    Ian Dickinson 
    ian.dickinson at pipex.net
       
    Mon Nov 22 04:13:10 EST 2004
    
    
  
Ryan O'Connell wrote:
> I've also heard (but been unable to verify) that Engine 0 and 1 line 
> cards for the GSR won't be able to take a full routing table past a 
> certain point, which I know if it's true is going to cause a lot of 
> larger ISPs issues.
Will possibly happen around the same time as a VIP4-80 is out of time.
All the 0 and 1 beasties I've seen personally have 256Mb Route Memory.
It's a short while yet, and will happen eventually, but you can
probably kill the prefix-load easily enough by changing usage patterns,
as long as you have new iron for the full-table work.  I have some of
these older cards running with 200Mb free earning good revenue...
But the NPE-300 and 3660 et al will hit this problem first and soon.
-- 
Ian Dickinson
Development Engineer
PIPEX
ian.dickinson at pipex.net
http://www.pipex.net
This e-mail is subject to: http://www.pipex.net/disclaimer.html
    
    
More information about the cisco-nsp
mailing list