[c-nsp] VOIP QoS on frame-ATM link

Rodney Dunn rodunn at cisco.com
Tue Nov 23 09:34:44 EST 2004


I would suggest you take a look at:

http://www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a00800c83b3.shtml

You can attach the service policy direction to
the VC but make sure you understand the impact
of the cell overhead.

Rodney

On Fri, Nov 19, 2004 at 10:59:41AM -0700, Christopher J. Wolff wrote:
> Dear List;
> 
> I have a frame relay circuit that terminates in a 2621XM.  The other end of
> this circuit is merged into an ATM DS3 that terminates in a 7513.
> 
> The customer is running voip on this circuit and needs some QoS parameters
> applied.  I have the following successfully prioritizing RTP on the 2621XM
> WAN output side but I need some recommendations on what to do on the ATM
> side.  CCO has plenty of docs for frame but not the reciprocal docs for the
> ATM IPVC...  Thank you very much in advance.
> 
> 2621XM side...
> 
> class-map match-all voice-signaling
>   match access-group 103
> class-map match-all voice-traffic
>   match access-group 102
> !
> !
> policy-map voice-policy
>   class voice-traffic
>     priority 768
>   class voice-signaling
>    bandwidth 128
>   class class-default
>    fair-queue
> 
> interface Serial0/0
>  description Frame_Relay
>  no ip address
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip accounting access-violations
>  encapsulation frame-relay IETF
>  no ip route-cache
>  no ip mroute-cache
>  no fair-queue
>  frame-relay traffic-shaping
> !
> interface Serial0/0.100 point-to-point
>  ip address 192.168.0.1 255.255.255.252
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip accounting access-violations
>  ip nat outside
>  no ip route-cache
>  ip ospf network broadcast
>  no ip mroute-cache
>  frame-relay interface-dlci 16   
>   class VOIPovFR
> 
> map-class frame-relay VOIPovFR
>  no frame-relay adaptive-shaping
>  frame-relay cir 896000
>  frame-relay mincir 896000
>  service-policy output voice-policy
> 
> access-list 102 permit udp any any range 16384 32767
> access-list 103 permit tcp any any range 5000 6000
> 
> 
> 
> ......7513 side
> 
> interface ATM8/0/0.91 point-to-point
>  description Frame Relay
>  mtu 1500
>  bandwidth 896
>  ip address 192.168.0.2 255.255.255.252
>  ip ospf network broadcast
>  no ip mroute-cache
>  class-int fr-voip
>  pvc 1/122
>   protocol ip 192.168.0.2 broadcast
>   ubr 1700
>   oam-pvc manage
>   encapsulation aal5snap
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list