[c-nsp] cisco 6500 sup2 high load
adamk at sch.bme.hu
Sat Oct 2 21:52:38 EDT 2004
On Sat, 2 Oct 2004, Alex Rubenstein wrote:
> Somewhere, you've lost hardware cef. What version of code are you running?
about the version:
IOS (tm) MSFC2 Software (C6MSFC2-PO3SV-M), Version 12.1(13)E6, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Akiron#sh ip cef sum
IP Distributed CEF with switching (Table Version 498), flags=0x0
408 routes, 0 reresolve, 0 unresolved (0 old, 0 new), peak 1
411 leaves, 32 nodes, 89232 bytes, 501 inserts, 90 invalidations
1 load sharing elements, 336 bytes, 1 references
universal per-destination load sharing algorithm, id FC963BF5
2(0) CEF resets, 1 revisions of existing leaves
Resolution Timer: Exponential (currently 1s, peak 1s)
0 in-place/0 aborted modifications
refcounts: 9238 leaf, 8448 node
Table epoch: 0 (411 entries at this epoch)
Adjacency Table has 383 adjacencies
> What does a 'sho catalyst' show (assuming this is integrated)?
it's not, i have no show catalyst command.
More information about the cisco-nsp