[c-nsp] boot config on 26xx

[Michael Markstaller]

a related question: the below only works on certain platforms, the link below says
"This command is only available on Class A file system platforms", whatever this means (the docs don't list many current platforms)
now, anybody knows a way  to move startup-config into flash on a 2651 ? 
I have some where compressed config is quite close to nvram-limit and already had troubles with lost certs due to nvram-size..

"boot config" works fine on i.e. a c803 and 7206, but isn't available on (just checked): 
1712,1760,2621,2651,2621XM,3725,3745 - all running IOS 12.3

I'm just a bit confused because i.e. the "squeeze" command is also said to be avail only on "Class A" filesystems working on all above mentioned platforms..

Michael

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Marko Milivojevic
Sent: Tuesday, October 12, 2004 5:00 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Reading config from disk0: on 7204VXR?

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_command_reference_chapter09186a00800d9837.html#1017539

To write the config, you can use: copy running-config disk0:filename

Marko.