[c-nsp] boot config on 26xx

Bruce Pinsky bep at whack.org
Tue Oct 12 13:19:19 EDT 2004


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Michael Markstaller wrote:
| a related question: the below only works on certain platforms, the link
below says
| "This command is only available on Class A file system platforms",
whatever this means (the docs don't list many current platforms)
| now, anybody knows a way  to move startup-config into flash on a 2651 ?
| I have some where compressed config is quite close to nvram-limit and
already had troubles with lost certs due to nvram-size..
|
| "boot config" works fine on i.e. a c803 and 7206, but isn't available on
(just checked):
| 1712,1760,2621,2651,2621XM,3725,3745 - all running IOS 12.3
|
| I'm just a bit confused because i.e. the "squeeze" command is also said
to be avail only on "Class A" filesystems working on all above mentioned
platforms..
|

http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtml

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)

iD8DBQFBbBIWE1XcgMgrtyYRAkR6AJ9fVNleuuQSlDvX/rTwaGrMillfmgCbB4n9
lOL6yrpRG3eP15rh4UQVBGg=
=hgqH
-----END PGP SIGNATURE-----


More information about the cisco-nsp mailing list