[c-nsp] Reading config from disk0: on 7204VXR?

[Mike Bacher]

Chuck S wrote:
> You may want to take a look at pvc ranges.  I've used this before due
> to the size of the config with subint's for every RBE customer.  I
> just left enough room for plenty of dynamic customers in the range
> before adding PVC's for static IP customers.  Of course, this isn't
> very practical if you have a number of VPI's.

Well, all of our customers are given static IPs, so I'm not sure that 
PVC ranges would work.  An example of our config:

interface ATM3/0.200280 point-to-point
  ip unnumbered Loopback0
  no ip route-cache
  no ip mroute-cache
  atm route-bridged ip
  pvc 2/280

ip route 65.38.10.89 255.255.255.255 ATM3/0.200280
ip route 65.38.10.90 255.255.255.255 ATM3/0.200280

We have about 30 VPI's..

-- 

-----------------------------------------
Mike Bacher / isp-list at tulsaconnect.com
TCIS - TulsaConnect Internet Services
Phone: 918-584-1100x110 Fax: 918-582-5776
-----------------------------------------