[c-nsp] 6816 w/o SFM ?

[Alex Rubenstein]

Correct.

It supports both a DFC with a S2/M2, or a DFC3 with a Sup720.

You asked, "Will a WS-6816 work in a SUP-2U/MSFC2 without a Switch Fabric 
Module?"

While the document says, "supported only with a Sup2/SFM", which is OK 
because this document is centric to MSFC1/2 system.

Seperately on CCO it states this card is supported on a Sup720.

So, to answer your question, "No, it will not work on a s2/m2 without a 
SFM."




On Thu, 21 Oct 2004, Deepak Jain wrote:

>
> Actually, speaking of the CCO profile, it says this:
>
> Optional DFC Upgrade Support
> 	Selection of:
> · WS-F6K-DFC with Supervisor Engine 2 and SFM(2);
> · Use WS-F6K-DFC3 with Supervisor Engine 720




-- Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben --
--    Net Access Corporation, 800-NET-ME-36, http://www.nac.net   --