[c-nsp] CX-FEIP-2TX PA's in a VIP?

[Brian Feeny]

I am pretty sure you can do this yes.  You can even stick them into a 
7200 directly
and they are seen as PA-FE-TX.

Brian

On Oct 23, 2004, at 10:32 PM, Bill Wichers wrote:

> I'm assuming this is too good to be true, but I have heard that the 
> PAs in
> a CX-FEIP-2TX can be pulled out and will work in a VIP as if they were
> PA-FE-TXes. Can this be? I am skeptical since it seems like it will be 
> one
> of those "looks like and fits but doesn't actually work" deals.
>
> If it *can* work, that would be great as I have several CX-FEIP-2TX 
> blades
> and VIP2s lying around. PAs in a VIP would seem to be a lot better 
> than in
> an old CX-style blade. I'm concerned since we are getting to where we 
> are
> nervous about hitting the ~70 Mb/s rate on a few rotuers that the
> CX-FEIP-2TX is supposed to max out at.
>
>      -Bill
>
>
> *****************************
> Waveform Technology
> UNIX Systems Administrator
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 186 bytes
Desc: This is a digitally signed message part
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20041024/d67651ad/PGP.bin