[c-nsp] Trying to set vtp v2 mode fails
Orion Poplawski
orion at cora.nwra.com
Tue Oct 26 16:55:58 EDT 2004
I'm just getting started with VLANs on a Catalyst 3500XL and a pair of
2900s. When trying to set v2 mode, I get:
cat35(vlan)#vtp v2
V2 mode enabled.
cat35(vlan)#apply
VLAN 1003 parent VLAN missing
APPLY failed.
Any ideas?
cat35# show vla
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
Fa0/5, Fa0/6, Fa0/7, Fa0/8,
Fa0/9, Fa0/10, Fa0/11,
Fa0/12,
Fa0/13, Fa0/15, Fa0/16,
Fa0/17,
Fa0/18, Fa0/19, Fa0/20,
Fa0/21,
Fa0/22, Fa0/23, Fa0/24,
Fa0/25,
Fa0/26, Fa0/27, Fa0/28,
Fa0/29,
Fa0/30, Fa0/31, Fa0/32,
Fa0/33,
Fa0/34, Fa0/35, Fa0/36,
Fa0/37,
Fa0/38, Fa0/39, Fa0/40,
Fa0/41,
Fa0/42, Fa0/43, Fa0/44,
Fa0/45,
Fa0/46, Fa0/47, Fa0/48,
Gi0/1,
Gi0/2
2 VLAN0002 active Fa0/14
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------
------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
More information about the cisco-nsp
mailing list