[c-nsp] Trying to set vtp v2 mode fails

[Abhishek Mande]

Try

SwitchName(vlan)#vlan 1003 parent 1005

or u have a bad vlan.dat ... delete that and that should fix this .

Abhishek
----- Original Message ----- 
From: "Orion Poplawski" <orion at cora.nwra.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 26, 2004 2:55 PM
Subject: [c-nsp] Trying to set vtp v2 mode fails


> I'm just getting started with VLANs on a Catalyst 3500XL and a pair of
> 2900s.  When trying to set v2 mode, I get:
>
> cat35(vlan)#vtp v2
> V2 mode enabled.
> cat35(vlan)#apply
> VLAN 1003 parent VLAN missing
> APPLY failed.
>
> Any ideas?
>
> cat35# show vla
> VLAN Name                             Status    Ports
> ---- -------------------------------- --------- 
> -------------------------------
> 1    default                          active    Fa0/1, Fa0/2, Fa0/3,
Fa0/4,
>                                                  Fa0/5, Fa0/6, Fa0/7,
Fa0/8,
>                                                  Fa0/9, Fa0/10, Fa0/11,
> Fa0/12,
>                                                  Fa0/13, Fa0/15, Fa0/16,
> Fa0/17,
>                                                  Fa0/18, Fa0/19, Fa0/20,
> Fa0/21,
>                                                  Fa0/22, Fa0/23, Fa0/24,
> Fa0/25,
>                                                  Fa0/26, Fa0/27, Fa0/28,
> Fa0/29,
>                                                  Fa0/30, Fa0/31, Fa0/32,
> Fa0/33,
>                                                  Fa0/34, Fa0/35, Fa0/36,
> Fa0/37,
>                                                  Fa0/38, Fa0/39, Fa0/40,
> Fa0/41,
>                                                  Fa0/42, Fa0/43, Fa0/44,
> Fa0/45,
>                                                  Fa0/46, Fa0/47, Fa0/48,
> Gi0/1,
>                                                  Gi0/2
> 2    VLAN0002                         active    Fa0/14
> 1002 fddi-default                     active
> 1003 token-ring-default               active
> 1004 fddinet-default                  active
> 1005 trnet-default                    active
>
> VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1
> Trans2
> ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ 
> ------
> 1    enet  100001     1500  -      -      -        -    -        0      0
> 2    enet  100002     1500  -      -      -        -    -        0      0
> 1002 fddi  101002     1500  -      -      -        -    -        0      0
> 1003 tr    101003     1500  -      -      -        -    -        0      0
> 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
> 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>