[c-nsp] Trying to set vtp v2 mode fails

[Orion Poplawski]

Abhishek Mande wrote:
> Try
> 
> SwitchName(vlan)#vlan 1003 parent 1005
> 
> or u have a bad vlan.dat ... delete that and that should fix this .
> 
> Abhishek

Thanks for the help, but:

cat35#vlan data
cat35(vlan)#vlan 1003 parent 1005
VLAN 1003 modified:
     Parent VLAN 1005
cat35(vlan)#vtp v2
V2 mode enabled.
cat35(vlan)#exit
VLAN 1003 ring number missing
APPLY failed.
Exiting....


Tried removing vlan.dat:

cat35#del flash:/vlan.dat
Delete filename [vlan.dat]?
Delete flash:/vlan.dat? [confirm]
cat35#vlan data
cat35(vlan)#vtp v2
V2 mode enabled.
cat35(vlan)#exit
VLAN 1003 parent VLAN missing
APPLY failed.
Exiting....
at35#vla data
cat35(vlan)#vlan 1003 parent 1005
VLAN 1003 modified:
     Parent VLAN 1005
cat35(vlan)#exit
APPLY completed.
Exiting....
cat35#vlan data
cat35(vlan)#vtp v2
V2 mode enabled.
cat35(vlan)#exit
VLAN 1003 ring number missing
APPLY failed.
Exiting....

Any other ideas?

- Orion