crossconnection? [was: Re: [c-nsp] PA-POS-2OC3]

[Oliver Boehmer (oboehmer)]

Adrian Bool <mailto:aid at logic.org.uk> wrote on Wednesday, October 27,
2004 3:30 PM:

> On Wed, 27 Oct 2004, Oliver Boehmer \(oboehmer\) wrote:
>>> Speaking of channelized adapters, is a c7200 with two PA-MC-STM-1's
>>> capable of crossconnecting specific VC12's (or VC3's, whatever..)
>>> from each STM-1 coming to the router?
>> 
>> No. the channelized STM1 (as well as other channelized adapaters) can
>> only terminate the circuits, you can't turn your c7200 into a MUX..
> 
> Although I agree with this for the STM1, I think you can cross connect
> DS0s on channelised E/T1s if you are on a 7200VXR chassis...

Yes, you can, but you need the MIX-enabled E1/T1 PA's
(http://www.cisco.com/warp/public/cc/pd/ifaa/pa/mix/prodlit/1219_pp.htm)

	oli