[c-nsp] Cisco 3640 Memory leak problem

[Jordan Tikvesanski]

Hi all,

I have a memory problem on Cisco 3640. Recently we configured mrtg 
graphs for used/free memory and realised that the Processor Used memory 
is constantly increasing. In about a month it causes the router to crash 
and after restart it takes 4-5 MB less memory.

The router is running 12.2(15)T9 IOS. It has 2 (out of 4) E1 PRI modules 
enabled, and H.323 gatekeeper running.

Any suggestions would be appreciated.


TIA J.

Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IX-M), Version 12.2(15)T9,  RELEASE 
SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 01-Nov-03 02:47 by ccai
Image text-base: 0x60008950, data-base: 0x60E56000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE 
SOFTWARE (fc1)

zoria uptime is 5 days, 21 hours, 4 minutes
System returned to ROM by reload
System restarted at 11:13:41 CEST Fri Oct 22 2004
System image file is "slot0:c3640-ix-mz.122-15.T9.bin"

cisco 3640 (R4700) processor (revision 0x00) with 41984K/7168K bytes of 
memory.
Processor board ID 17632148
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
MICA-6DM Firmware: CP ver 2940 - 7/24/2002, SP ver 2940 - 7/24/2002.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
124 Serial network interface(s)
60 terminal line(s)
4 Channelized E1/PRI port(s)
DRAM configuration is 32 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x2102

-- 
Jordan Tikvesanski, mailto:jtikves(at)sonet(dot)com(dot)mk
Sonet Network Sollution
ul. Partizanski odredi 72a, 1000 Skopje, Macedonia
tel: +389 2 3072375
fax: +389 2 3072757
http://www.sonet.com.mk