[c-nsp] Site Survey

[Josh Duffek]

Jeff,
Afaik ours were set just like they would normally be configured in a
production environment, proper IP/hostname stuff aside.  If you want a
config I'll try to dig that up.

What are you using to do the survey?  I'd recommend Airmagnet, but I
haven't used anything else.

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Rieman, Jeffrey
> Sent: Thursday, October 28, 2004 8:11 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Site Survey
> 
> Has anyone here done a site survey with an aironet 1200?  Do I need to
> put it in a special mode so that I can see the radio signal when it is
> not plugged into the network?  I looked on cisco's site for a doc but
> couldn't find one... anyone have any pointers?
> 
> 
> 
> Thanks!
> 
> Jeff
> 
> 
> 
> ---
> 
> Jeff Rieman
> 
> Network Manager
> 
> Ohio Northern University
> 
> (419) 772-2497
> 
> j-rieman at onu.edu
> 
> 
> 
> "The ultimate measure of a man is not where
> 
> he stands in moments of comfort and convenience,
> 
> but where he stands at times of challenge and controversy."
>                    -Dr. Martin Luther King Jr.
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/