[c-nsp] OC12 on 6509..?

[Michael Lyngbøl]

On 28.10.2004 07:27:46 +0000, Richard J. Sears wrote:
> I am looking to deploy a Cisco 6509 w/SUP720 and need to connect two
> OC12s from that switch to another 6509 switch.
> 
> At first I was looking at a FlexWan module for the 6509, however
> according to Cisco's website , no OC12 cards are supported on that card.
> 
> 
> Does anyone know of a POS OC12 solution for 6509's...?

2 and 4 port POS OC12/STM-4 available:

<http://www.cisco.com/en/US/products/hw/routers/ps368/products_relevant_interfaces_and_modules.html>

/Michael

-- 
Michael Lyngbøl -- michael at lyngbol dot dk
Network Architect, AS3292 TDC, IP·backbone