[c-nsp] OC12 layer2 ?

[Michael Smith]

You could also run an ATM OC-12 to a LANE module on a 5500.  Then, you
can map PVC's to VLAN's directly using RFC 1483 bridging.  Only caveat
is the 5500 only supports ISL natively.  If you try to convert to dot1Q
on the 5500 things get weird.

Mike 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
> Sent: Wednesday, October 27, 2004 3:58 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] OC12 layer2 ?
> 
> 
> I need to run ethernet across an OC12.  Any clues as to what 
> sort of gear I'd need at both ends?  Ideally I'd run an OC12 
> from a GSR to some box that acted like a switch/bridge.
> 
> 
> --
> matthew zeier, Sr. Network Engineer  | "Nothing in life is to 
> be feared.
> InteleNet Communications, Inc.       |  It is only to be understood."
> (949) 784-7904                       |       - Marie Curie 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>