[c-nsp] Graphing more than 114Mbps with mrtg

[Adrian Pirciu]

Had the same problem. Use .1.3.6.1.2.1.31.1.1.1.6

.iso.org.dod.internet.mgmt.mib-2.ifMIB.ifMIBObjects.ifXTable.ifXEntry.ifHCInOctets 
and family :). They are 64 bit counters. 

On Friday 29 October 2004 11:24, Mark Taylor wrote:
> Without meaning to turn the list into an mrtg forum :)
>
> I don't seem to be able to graph interface transfer rates above
> 114Mbps with mrtg. I think this is because the cisco counter
> interfaces.ifTable.ifEntry.ifInOctets.x wraps back to the start
> within the 5 minute collector period at rates above this. Does
> anybody know how to solve this?
>
> Temporarily I'm collecting the data more often before the counters
> wrap. Is there a different OID that I need to use? Or do I need to
> configure something within the snmp-server on the cisco to use a
> bigger counter size?
>
> I have the same issue on Cisco IOS routers/switches and also CatOS
> switches.
>
> Any suggestions greatly appreciated,
> Thanks,
> Mark.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
------------------------------------------------------------------------
Adrian Pirciu
Network Engineer