[c-nsp] ISDN to Mauritius / change bearer to speechonoutgoingcalls
Josh Duffek
consultantjd16 at ridemetro.org
Fri Oct 29 13:07:34 EDT 2004
Ok so if you can make a loop call to yourself, on both sides?
Either way, end-to-end, your receive path on 4206 is broke. You never
see any CONFREQs coming in, and on 4306 you see stuff coming
in/out...but it never makes it to 4206.
Explain this to the telco and hopefully they can figure out what is
broken.
josh duffek network engineer
consultantjd16 at ridemetro.org
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Michael Markstaller
> Sent: Friday, October 29, 2004 11:59 AM
> To: cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] ISDN to Mauritius / change bearer to
> speechonoutgoingcalls
>
> now comining answers below..
>
> > You may not have data service activated on the BRI line, thus the
bear
> cap message.
> > You can try and test the local line by calling a known good number
with
> a 64k data call. If it works , the problem
> > that your carrier is not allowing 64k data calls thru to Mauritius
and
> you need to contact them.
> > Brian
> sure, but it is not my own line in Mauritius and it took me 4 weeks
for
> them to connect the existing S0 it at all...
> so you can imagine what happens when I tell them to activate some
data-
> service now, getting onto something in the next cargo-harbour will be
> faster ;)
> I've already checked the mauritius-telcos' website and found nothing
about
> any data-option for ISDN-lines;
> so far I only know about data-crippled ISDN-lines in UK but I agree
that
> this is most likely the reason..
>
> > Oh...and check this out:
> > Performing Loopback Calls to Test BRI Circuits
> > http://www.cisco.com/warp/public/471/bri_loopback_call.html
>
> already did this, the isdn itself is fine; when calling myself I see
ppp
> packets going in and out, LCP getting up and then CHAP-packets. the
remote
> call fails with LCP at all..
>
> > Let us see "debug ppp nego" and "debug aaa authen/author" if you
have
> > AAA on. Probably getting all outbound CONFREQs on one side. Can
you
> > also send a "sh int bri:X" as well.
>
> sure, but it looks like they don't get a single packet from each
other..
> - "04206" is the caller in Germany, "04306" is the called in
Mauritius.
> - enabled deb ppp neg / aaa authe / aaa autho
>
> 04206#sh int br0:1
> BRI0:1 is up, line protocol is up
> Hardware is BRI with S/T interface and POTS
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 225/255, txload 1/255, rxload 1/255
> Encapsulation PPP, LCP REQsent, multilink Closed
> Closed: BACP, IPCP, loopback not set idle 00:01:40
> Interface is bound to Di106 (Encapsulation PPP)
> Last input 00:31:01, output 00:00:09, output hang never
> Last clearing of "show interface" counters 00:00:38
> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops:
0
> Queueing strategy: fifo
> Output queue: 0/40 (size/max)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 1 giants, 0 throttles
> 6 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored, 4 abort
> 2 packets output, 62 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 1 carrier transitions
>
>
> 04306#sh int br0:1
> BRI0:1 is up, line protocol is up
> Hardware is PQUICC BRI
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation PPP, LCP REQsent, loopback not set
> Time to interface disconnect: idle 00:01:32
> Interface is bound to Di2 (Encapsulation PPP)
> Last input 00:02:57, output 00:00:05, output hang never
> Last clearing of "show interface" counters 00:01:04
> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops:
0
> Queueing strategy: fifo
> Output queue: 0/40 (size/max)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 3 packets output, 57 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 2 carrier transitions
>
> --- cut log 04206 ---
> Oct 29 18:37:21 MEST: BR0 DDR: Dialing cause ip (s=172.30.24.6,
> d=172.30.24.106)
> Oct 29 18:37:21 MEST: BR0 DDR: Attempting to dial 000230xxxxxxx
> Oct 29 18:37:21 MEST: ISDN BR0 Q931: TX -> SETUP pd = 8 callref =
0x09
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0x83
> Called Party Number i = 0x80, '000230xxxxxxx'
> Plan:Unknown, Type:Unknown
> Oct 29 18:37:21 MEST: ISDN BR0 Q931: RX <- SETUP_ACK pd = 8 callref =
> 0x89
> Channel ID i = 0x89
> Progress Ind i = 0x8188 - In-band info or appropriate now
> available
> Oct 29 18:37:30 MEST: ISDN BR0 Q931: RX <- CONNECT pd = 8 callref =
0x89
> Date/Time i = 0x040A1D1225
> Connected Number i = 0x0180303032333032333432373936
> Oct 29 18:37:30 MEST: %LINK-3-UPDOWN: Interface BRI0:1, changed state
to
> up
> Oct 29 18:37:30 MEST: BR0:1: interface must be fifo queue, force fifo
> Oct 29 18:37:30 MEST: %DIALER-6-BIND: Interface BR0:1 bound to profile
> Di106
> Oct 29 18:37:30 MEST: ISDN BR0 Q931: TX -> CONNECT_ACK pd = 8 callref
=
> 0x09
> Oct 29 18:37:30 MEST: AAA/BIND(000004E5): Bind i/f BRI0:1
> Oct 29 18:37:30 MEST: BR0:1 PPP: Using dialer call direction
> Oct 29 18:37:30 MEST: BR0:1 PPP: Treating connection as a callout
> Oct 29 18:37:30 MEST: BR0:1 PPP: Phase is ESTABLISHING, Active Open
> Oct 29 18:37:30 MEST: AAA/AUTHOR (000004E5): Method list id=0 not
> configured. Skip author
> Oct 29 18:37:30 MEST: BR0:1 PPP: Authorization NOT required
> Oct 29 18:37:30 MEST: BR0:1 AAA/AUTHOR/LCP: Authorization succeeds
> trivially
> Oct 29 18:37:30 MEST: BR0:1 LCP: O CONFREQ [Closed] id 236 len 27
> Oct 29 18:37:30 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:37:30 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:37:30 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:37:30 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:37:30 MEST: ISDN BR0 Q931: RX <- FACILITY pd = 8 callref =
0x89
> Facility i =
0x91A11502016D020122300DA1053003020119820100830100
> - ETSI Supplementary Service, Invoke, AOC-D Charging Units: 25
> Oct 29 18:37:35 MEST: ISDN BR0 Q931: RX <- INFORMATION pd = 8 callref
=
> 0x89
> Display i = '25 Einheiten'
> Oct 29 18:37:36 MEST: %ISDN-6-CONNECT: Interface BRI0:1 is now
connected
> to 000230xxxxxxx
> Oct 29 18:37:40 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:37:40 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 237 len 27
> Oct 29 18:37:40 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:37:40 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:37:40 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:37:40 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:37:50 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:37:50 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 238 len 27
> Oct 29 18:37:50 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:37:50 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:37:50 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:37:50 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:00 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:00 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 239 len 27
> Oct 29 18:38:00 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:00 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:00 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:00 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:10 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:10 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 240 len 27
> Oct 29 18:38:10 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:10 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:10 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:10 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:20 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:20 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 241 len 27
> Oct 29 18:38:20 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:20 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:20 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:20 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:30 MEST: ISDN BR0 Q931: RX <- INFORMATION pd = 8 callref
=
> 0x89
> Display i = '50 Einheiten'
> Oct 29 18:38:30 MEST: ISDN BR0 Q931: RX <- FACILITY pd = 8 callref =
0x89
> Facility i =
0x91A11502016D020122300DA1053003020132820100830100
> - ETSI Supplementary Service, Invoke, AOC-D Charging Units: 50
> Oct 29 18:38:30 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:30 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 242 len 27
> Oct 29 18:38:30 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:30 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:30 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:30 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:40 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:40 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 243 len 27
> Oct 29 18:38:40 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:40 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:40 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:40 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:38:50 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:38:50 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 244 len 27
> Oct 29 18:38:50 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:38:50 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:38:50 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:38:50 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:39:00 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:39:00 MEST: BR0:1 LCP: O CONFREQ [REQsent] id 245 len 27
> Oct 29 18:39:00 MEST: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> Oct 29 18:39:00 MEST: BR0:1 LCP: MagicNumber 0x41DEF859
> (0x050641DEF859)
> Oct 29 18:39:00 MEST: BR0:1 LCP: MRRU 1524 (0x110405F4)
> Oct 29 18:39:00 MEST: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036)
> Oct 29 18:39:10 MEST: BR0:1 LCP: TIMEout: State REQsent
> Oct 29 18:39:10 MEST: BR0:1 DDR: disconnecting call
> Oct 29 18:39:10 MEST: BR0:1 LCP: State is Listen
> Oct 29 18:39:10 MEST: %ISDN-6-DISCONNECT: Interface BRI0:1
disconnected
> from 000230xxxxxxx , call lasted 100 seconds
> Oct 29 18:39:10 MEST: ISDN BR0 Q931: TX -> DISCONNECT pd = 8 callref
=
> 0x09
> Cause i = 0x8090 - Normal call clearing
> Oct 29 18:39:11 MEST: ISDN BR0 Q931: RX <- RELEASE pd = 8 callref =
0x89
> Facility i = 0x91A11402016D020124300C300AA1053003020132820100
> - ETSI Supplementary Service, Invoke, AOC-E Charging Units: 50
> Display i = '50 Einheiten'
> Oct 29 18:39:11 MEST: %LINK-3-UPDOWN: Interface BRI0:1, changed state
to
> down
> Oct 29 18:39:11 MEST: BR0 DDR: has total 0 call(s), dial_out 0,
dial_in 0
> Oct 29 18:39:11 MEST: %DIALER-6-UNBIND: Interface BR0:1 unbound from
> profile Di106
> Oct 29 18:39:11 MEST: ISDN BR0 Q931: TX -> RELEASE_COMP pd = 8
callref =
> 0x09
> Oct 29 18:39:11 MEST: BR0:1 PPP: Sending Acct Event[Down] id[4E5]
> Oct 29 18:39:11 MEST: BR0:1 LCP: State is Closed
> Oct 29 18:39:11 MEST: BR0:1 PPP: Phase is DOWN
>
>
> --- cut log 04306 ---
> *Aug 18 02:15:09.069 MUT: ISDN BR0 Q931: RX <- SETUP pd = 8 callref =
> 0x0B
> Sending Complete
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0x89
> Calling Party Number i = 0x1181, '498xxxxxx'
> Plan:ISDN, Type:International
> Called Party Number i = 0x81, '2796'
> Plan:ISDN, Type:Unknown
> *Aug 18 02:15:09.077 MUT: AAA/BIND(0000001E): Bind i/f BRI0:1
> *Aug 18 02:15:09.081 MUT: %DIALER-6-BIND: Interface BR0:1 bound to
profile
> Di2
> *Aug 18 02:15:09.085 MUT: %LINK-3-UPDOWN: Interface BRI0:1, changed
state
> to up
> *Aug 18 02:15:09.089 MUT: ISDN BR0 Q931: TX -> CALL_PROC pd = 8
callref =
> 0x8B
> Channel ID i = 0x89
> *Aug 18 02:15:09.089 MUT: BR0:1 PPP: Using dialer call direction
> *Aug 18 02:15:09.089 MUT: BR0:1 PPP: Treating connection as a callin
> *Aug 18 02:15:09.089 MUT: BR0:1 PPP: Phase is ESTABLISHING, Passive
Open
> *Aug 18 02:15:09.089 MUT: BR0:1 LCP: State is Listen
> *Aug 18 02:15:09.113 MUT: ISDN BR0 Q931: TX -> CONNECT pd = 8 callref
=
> 0x8B
> *Aug 18 02:15:09.465 MUT: ISDN BR0 Q931: RX <- CONNECT_ACK pd = 8
callref
> = 0x0
> B
> *Aug 18 02:15:11.077 MUT: BR0:1 LCP: TIMEout: State Listen
> *Aug 18 02:15:11.077 MUT: AAA/AUTHOR (0000001E): Method list id=0 not
> configured
> . Skip author
> *Aug 18 02:15:11.077 MUT: BR0:1 AAA/AUTHOR/LCP: Authorization succeeds
> trivially
>
> *Aug 18 02:15:11.077 MUT: BR0:1 LCP: O CONFREQ [Listen] id 85 len 15
> *Aug 18 02:15:11.077 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:11.077 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:15:15.085 MUT: %ISDN-6-CONNECT: Interface BRI0:1 is now
> connected to
> 498xxxxx
> *Aug 18 02:15:21.093 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:15:21.093 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 86 len 15
> *Aug 18 02:15:21.093 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:21.093 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:15:30.113 MUT: BR0:1 LCP: I CONFREQ [REQsent] id 218 len 27
> *Aug 18 02:15:30.113 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:30.113 MUT: BR0:1 LCP: MagicNumber 0x41DAD4C3
> (0x050641DAD4C3)
> *Aug 18 02:15:30.113 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:30.113 MUT: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036
> )
> *Aug 18 02:15:30.117 MUT: BR0:1 LCP: O CONFREJ [REQsent] id 218 len 8
> *Aug 18 02:15:30.117 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:30.165 MUT: %SEC-6-IPACCESSLOGP: list 175 denied udp
> 10.2.43.172(8
> 008) -> 239.255.255.250(1900), 5 packets
> *Aug 18 02:15:31.109 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:15:31.109 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 87 len 15
> *Aug 18 02:15:31.109 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:31.109 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:15:40.129 MUT: BR0:1 LCP: I CONFREQ [REQsent] id 219 len 27
> *Aug 18 02:15:40.129 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:40.129 MUT: BR0:1 LCP: MagicNumber 0x41DAD4C3
> (0x050641DAD4C3)
> *Aug 18 02:15:40.129 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:40.129 MUT: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036
> )
> *Aug 18 02:15:40.133 MUT: BR0:1 LCP: O CONFREJ [REQsent] id 219 len 8
> *Aug 18 02:15:40.133 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:41.125 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:15:41.125 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 88 len 15
> *Aug 18 02:15:41.125 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:41.125 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:15:50.145 MUT: BR0:1 LCP: I CONFREQ [REQsent] id 220 len 27
> *Aug 18 02:15:50.145 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:50.145 MUT: BR0:1 LCP: MagicNumber 0x41DAD4C3
> (0x050641DAD4C3)
> *Aug 18 02:15:50.145 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:50.145 MUT: BR0:1 LCP: EndpointDisc 1 04206
> (0x1308013034323036
> )
> *Aug 18 02:15:50.149 MUT: BR0:1 LCP: O CONFREJ [REQsent] id 220 len 8
> *Aug 18 02:15:50.149 MUT: BR0:1 LCP: MRRU 1524 (0x110405F4)
> *Aug 18 02:15:51.141 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:15:51.141 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 89 len 15
> *Aug 18 02:15:51.141 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:15:51.141 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:01.157 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:16:01.157 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 90 len 15
> *Aug 18 02:16:01.157 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:16:01.157 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:11.173 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:16:11.173 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 91 len 15
> *Aug 18 02:16:11.173 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:16:11.173 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:21.189 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:16:21.189 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 92 len 15
> *Aug 18 02:16:21.189 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:16:21.189 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:30.189 MUT: %SEC-6-IPACCESSLOGP: list 175 denied udp
> 10.2.43.250(8
> 008) -> 239.255.255.250(1900), 5 packets
> *Aug 18 02:16:31.205 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:16:31.205 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 93 len 15
> *Aug 18 02:16:31.205 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:16:31.205 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:41.221 MUT: BR0:1 LCP: TIMEout: State REQsent
> *Aug 18 02:16:41.221 MUT: BR0:1 LCP: O CONFREQ [REQsent] id 94 len 15
> *Aug 18 02:16:41.221 MUT: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
> *Aug 18 02:16:41.221 MUT: BR0:1 LCP: MagicNumber 0x35BC55C1
> (0x050635BC55C1)
> *Aug 18 02:16:50.997 MUT: ISDN BR0 Q931: RX <- DISCONNECT pd = 8
callref
> = 0x0B
>
> Cause i = 0x8590 - Normal call clearing
> Progress Ind i = 0x8288 - In-band info or appropriate now
> available
> *Aug 18 02:16:51.001 MUT: %ISDN-6-DISCONNECT: Interface BRI0:1
> disconnected fro
> m 498xxxxxx 04206, call lasted 101 seconds
> *Aug 18 02:16:51.001 MUT: %LINK-3-UPDOWN: Interface BRI0:1, changed
state
> to dow
> n
> *Aug 18 02:16:51.001 MUT: %DIALER-6-UNBIND: Interface BR0:1 unbound
from
> profile
> Di2
> *Aug 18 02:16:51.005 MUT: ISDN BR0 Q931: TX -> RELEASE pd = 8 callref
=
> 0x8B
> Cause i = 0x8090 - Normal call clearing
> *Aug 18 02:16:51.009 MUT: BR0:1 PPP: Sending Acct Event[Down] id[1E]
> *Aug 18 02:16:51.009 MUT: BR0:1 LCP: State is Closed
> *Aug 18 02:16:51.009 MUT: BR0:1 PPP: Phase is DOWN
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list