[c-nsp] cef inconsistency auto-repair ?

[Pierfrancesco Caci]

Does someone know how to enable the 2 things marked with the arrow?

G12416A-ST_TOR02#sh ip cef inc
Consistency checker master control: enabled
Table consistency checker state:
 lc-detect: enabled
  0/0/0/0 queries sent/ignored/checked/iterated
 scan-lc: enabled [83 prefixes checked every 60s]
  0/0/81350521/174 queries sent/ignored/checked/iterated
 scan-rp: enabled [83 prefixes checked every 60s]
  81322800/0/0/0 queries sent/ignored/checked/iterated
 scan-rib: enabled [1000 prefixes checked every 60s]
  195466289/0/195466289/0 queries sent/ignored/checked/iterated
 full-scan-rib: enabled
  0/0/0/0 queries sent/ignored/checked/iterated
 full-scan-rp: enabled
  0/0/0/0 queries sent/ignored/checked/iterated
 full-scan-lc: enabled
  0/0/0/0 queries sent/ignored/checked/iterated
Inconsistency error messages are disabled                <<=========
Inconsistency auto-repair is disabled                    <<=========
Inconsistency auto-repair runs: 0
Inconsistency statistics: 0 confirmed, 0/16 recorded
Table test modes: 
 Insert mode: normal
 Remove mode: normal


This is 12.0(23)S6. 

Thanks

Pf

-- 


-------------------------------------------------------------------------------
 Pierfrancesco Caci | Network & System Administrator - INOC-DBA: 6762*PFC
 p.caci at seabone.net | Telecom Italia Sparkle - http://etabeta.noc.seabone.net/
     Linux paperino 2.4.20 #1 Mon Dec 2 17:02:14 CET 2002 i686 GNU/Linux