[c-nsp] the right image for voip termination

[Voll, Scott]

Do you have a bug ID.?  I'm finding the same thing on my 2600 with
12.3.6 and cisco just RMA'd my router.  Did they RMA for no reason?

Scott

-----Original Message-----
From: Jared Mauch [mailto:jared at puck.nether.net] 
Sent: Wednesday, September 15, 2004 8:04 AM
To: Jan Czmok
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] the right image for voip termination

On Wed, Sep 15, 2004 at 12:57:38PM +0200, Jan Czmok wrote:
> Hi!

	Hi Jan ;-)

> Anyone could give me a recommendation for the right ios image.
> 
> I have:
> 
> 	- E1 (VWIC MFT-E1) 
> 	- Cisco 2611
> 
> I'd like to do:
> 
> 	- receive calls over the VWIC 
> 	- authenticate them over h323 gatekeeper
> 	- forward to h323 
> 	- also receive h323 calls and push them over the E1.
> 
> Any hints ?

	This depends on your memory and flash requirements.

	the IP Plus feature set supports most of these features, but
on the 2611 (not the 2611xm) you have limited flash space, so you
will likely get stuck running a c2600-ipvoice- image.

	I've been running this image for some time, with only a few
obnoxious (cosmetic) bugs related to it incrementing alignment errors.

	c2600-ipvoice-mz.123-6.bin

	that will run (and fit) in 64m dram, 16m flash.

	- jared


-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only
mine.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/