[c-nsp] faulty NPE-G1

[Rodney Dunn]

And I would think you would see "something" on the
console when you hit the power button when rommon
starts.

Try hitting the power button and then see if you
can break in to it and drop it in to rommon.

On Wed, Sep 22, 2004 at 05:20:10AM -0700, Martin Robinson wrote:
> Hello Richard,
> 
> We test these things every-day. It does sound like your heading for an rma, we have had dead NPE's before aswell. Hence why we always test ourselves prior to shipping. Only thing I can suggest just to confirm, is re-seat everything including the dram on the NPE-G1, but if the dram isn't properly sitted, it would have booted but with an error.
> 
> Regards Martin.
> 
>  
> ___________________________________________________
> 
> Martin Robinson
> Network Hardware Resale, LLC 
> Merchants Court 
> Singaporestraat 66
> 1175 RA Lijnden
> The Netherlands
> www.networkhardware.com <http://www.networkhardware.com/> 
> 
> Direct: +31 (0) 20 449 6927
> Fax: +31 (0) 20 449 6923
> martin at networkhardware.com <mailto:martin at networkhardware.com>  
> AIM: martinNHR 
> Network Hardware Resale 
> "The World's Largest Resource for Pre-Owned and
> Used CISCO Network Hardware"
> __________________________________________________
> 
> Click here <http://www.networkhardware.com/optout.aspx>  if you prefer not to receive future e-mail from Network Hardware Resale.
> Click here <http://www.networkhardware.com/privacy.aspx>  to view our privacy policy.
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of richard bosire
> Sent: Tuesday, September 21, 2004 10:59 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] faulty NPE-G1
> 
> 
> Howdy'
> 
> I have  a brand new Cisco 7206VXR  with NPE-G1. I suspect to NPE-G1 to have 
> gone kaputt. It has been working ok in the test lab but now it doesnt boot. 
> 
> when powered on,  the LEDs for power and Gi0/1-3 come on that is it , doesnt 
> go through the usual boot up sequence .
> Also there is nothing  being output on the console nor the Aux port,
> 
> Could it be dead or there is something else  I need to check?
> 
> regards
> 
> ./bosire
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/