[c-nsp] 2948G-L3 + Netflow: Possible?

[rwcrowe at comcast.net]

Netflow is not possible on this platform. It is one of the unsupported features.


--
Rob Crowe 
rwcrowe at comcast.net


-------------- Original message -------------- 

> 
> Hi folks, 
> 
> I am considering to use Netflow with my Catalyst 2948g-L3's. 
> Although, I was informed today by the local Cisco representative 
> that Netflow is not compatible with this switch. 
> Anybody could confirm this information? 
> My current necessity is to log/monitor network traffic in this switch. 
> Currently I am using MRTG but I am generating stats only per minute. 
> I need to detect/log/monitor any network failure possibly happening in 
> 10~30 seconds. 
> 
> Thanks in advance for any info, 
> 
> Isamar Maia 
> 
> 
> 
> 
> _______________________________________________ 
> cisco-nsp mailing list cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp 
> archive at http://puck.nether.net/pipermail/cisco-nsp/