[c-nsp] PA-2FE-TX speed

[Glenn Tan]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: MD5

Hi

I need a bit of help with this...
We purchased a 10Mbps Ethernet link to a telco's MPLS VPN network
and need to terminate this on a PA-2FE-TX on a 7507/VIP2-50.

Is there any way I can set the speed of the port to run at 10Mbps?
There isn't any speed command there and I'm wondering if
auto-negotiation is the only way to get this card to run at 10Mbps.

Please offer some suggestions.

Thanks!

Best Regards,

Glenn Tan
Senior Network Manager
Network Operations/Engineering
***********************************
Intermedia Network Services Pte Ltd
HP: +65 94371288
Tel: +65 65470911
Fax: +65 65470933
http://www.intermedia.com.sg
***********************************

-----BEGIN PGP SIGNATURE-----
Version: 2.6

iQCVAwUAQViFKytOAbSTzH2bAQHynwP/cSF3Qmw1mmxOtVbLgLriJbA/Mu/0i0Dx
/JVeS+jF5yTvZl3YyWWoeiFoQGPPHyGNE6B0CsEsxr8bkk4yWvY1hxn/mzgHW5G/
vdw9vSMt1ZAOprmOkeF2sZvHh/rTShdfzyTqfqErmI4V1cUjd9c5hyffsAH7MJEt
KuOa3atb3YY=
=naCz
-----END PGP SIGNATURE-----