[c-nsp] PA-2FE-TX speed

[Jay Ford]

On Tue, 28 Sep 2004, Glenn Tan wrote:
> I need a bit of help with this...
> We purchased a 10Mbps Ethernet link to a telco's MPLS VPN network
> and need to terminate this on a PA-2FE-TX on a 7507/VIP2-50.
>
> Is there any way I can set the speed of the port to run at 10Mbps?
> There isn't any speed command there and I'm wondering if
> auto-negotiation is the only way to get this card to run at 10Mbps.

I'm pretty sure that card does 100 Mbps only.  It won't do 10 or auto.

________________________________________________________________________
Jay Ford, Network Engineering Group, Information Technology Services
University of Iowa, Iowa City, IA 52242
email: jay-ford at uiowa.edu, phone: 319-335-5555, fax: 319-335-2951