[c-nsp] PA-2FE-TX speed

[Brian Vowell]

We have the single port version of the card, the PA-FE-TX, and it will 
definitely NOT do 10mbps.  There is no speed command because it only 
recognizes one speed-- 100mbps.

You'll have to get your ISP to rate-limit your 100mbps port to 10mbps.


--b

Jay Ford wrote:

>On Tue, 28 Sep 2004, Glenn Tan wrote:
>  
>
>>I need a bit of help with this...
>>We purchased a 10Mbps Ethernet link to a telco's MPLS VPN network
>>and need to terminate this on a PA-2FE-TX on a 7507/VIP2-50.
>>
>>Is there any way I can set the speed of the port to run at 10Mbps?
>>There isn't any speed command there and I'm wondering if
>>auto-negotiation is the only way to get this card to run at 10Mbps.
>>    
>>
>
>I'm pretty sure that card does 100 Mbps only.  It won't do 10 or auto.
>
>  
>