[c-nsp] PA-2FE-TX speed

[Glenn Tan]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: MD5

The product data sheet on the Cisco website says it does
auto-negotiation between 10 and 100.

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091c92.html

Tuesday, September 28, 2004, 5:27:16 AM, you wrote/Sie schrieben:

JF> On Tue, 28 Sep 2004, Glenn Tan wrote:
>> I need a bit of help with this...
>> We purchased a 10Mbps Ethernet link to a telco's MPLS VPN network
>> and need to terminate this on a PA-2FE-TX on a 7507/VIP2-50.
>>
>> Is there any way I can set the speed of the port to run at 10Mbps?
>> There isn't any speed command there and I'm wondering if
>> auto-negotiation is the only way to get this card to run at 10Mbps.

JF> I'm pretty sure that card does 100 Mbps only.  It won't do 10 or auto.

JF> ________________________________________________________________________
JF> Jay Ford, Network Engineering Group, Information Technology Services
JF> University of Iowa, Iowa City, IA 52242
JF> email: jay-ford at uiowa.edu, phone: 319-335-5555, fax: 319-335-2951


Best Regards,

Glenn Tan
Senior Network Manager
Network Operations/Engineering
***********************************
Intermedia Network Services Pte Ltd
HP: +65 94371288
Tel: +65 65470911
Fax: +65 65470933
http://www.intermedia.com.sg
***********************************

-----BEGIN PGP SIGNATURE-----
Version: 2.6

iQCVAwUAQViIOitOAbSTzH2bAQEHggQAsx/vqQoDw2M0+VXuOEMfWcIYkc0Pw/3y
1WzsAlGMy5h/BeCZEBkGswcLtm1XlJKSBN0V0LQGnk8V7RNhvmwhygOqwp7izNVs
OuUHAGU0+fi5MvY9ZQM1rgRo9DwJGLrzTytjQPwcTOJWeVmI/Nme06roqAyfYkks
NgXTgSDKbMs=
=d/qB
-----END PGP SIGNATURE-----