[c-nsp] PA-2FE-TX speed

Konstantin Barinov sbr at infonet.ee
Mon Sep 27 17:37:41 EDT 2004


This card is 100M only.

Use a cheap switch as a rate converter. ;)


br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia



Tuesday, September 28, 2004, 12:24:56 AM, you wrote:

GT> -----BEGIN PGP SIGNED MESSAGE-----
GT> Hash: MD5

GT> Hi

GT> I need a bit of help with this...
GT> We purchased a 10Mbps Ethernet link to a telco's MPLS VPN network
GT> and need to terminate this on a PA-2FE-TX on a 7507/VIP2-50.

GT> Is there any way I can set the speed of the port to run at 10Mbps?
GT> There isn't any speed command there and I'm wondering if
GT> auto-negotiation is the only way to get this card to run at 10Mbps.

GT> Please offer some suggestions.

GT> Thanks!

GT> Best Regards,

GT> Glenn Tan
GT> Senior Network Manager
GT> Network Operations/Engineering
GT> ***********************************
GT> Intermedia Network Services Pte Ltd
GT> HP: +65 94371288
GT> Tel: +65 65470911
GT> Fax: +65 65470933
GT> http://www.intermedia.com.sg
GT> ***********************************

GT> -----BEGIN PGP SIGNATURE-----
GT> Version: 2.6

GT> iQCVAwUAQViFKytOAbSTzH2bAQHynwP/cSF3Qmw1mmxOtVbLgLriJbA/Mu/0i0Dx
GT> /JVeS+jF5yTvZl3YyWWoeiFoQGPPHyGNE6B0CsEsxr8bkk4yWvY1hxn/mzgHW5G/
GT> vdw9vSMt1ZAOprmOkeF2sZvHh/rTShdfzyTqfqErmI4V1cUjd9c5hyffsAH7MJEt
GT> KuOa3atb3YY=
GT> =naCz
GT> -----END PGP SIGNATURE-----

GT> _______________________________________________
GT> cisco-nsp mailing list  cisco-nsp at puck.nether.net
GT> https://puck.nether.net/mailman/listinfo/cisco-nsp
GT> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list