[c-nsp] Gig-E in 7513

[Lupi, Guy]

I think you have to have the GEIP or GEIP+ for the 7500 series.  I've tried
the PA-GE in a VIP before and it didn't work for me.  I am looking at the
installation and configuration guide for the PA-GE and it doesn't indicate
that the 7500 series is a supported platform, the second link seems to
indicate the same.

http://www.cisco.com/application/pdf/en/us/guest/products/ps2595/c1146/ccmig
ration_09186a00800ad4ea.pdf

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet091
86a0080091ce7.html

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nic McCartney
Sent: Thursday, September 30, 2004 7:09 AM
To: Cisco-Nsp
Subject: [c-nsp] Gig-E in 7513


Guys, 
I wonder if anybody can comment on any limitations they have experienced
with the Gig-E PA for the 7513. I've been doing 
some testing recently I as soon as it hits 9% of line rate 
I start to lose traffic (ignored and CRC issues). I've tried diff VIP's PA's
cables slots chassis's etc and I see same old problem. Anyone else
seen/heard of similar issues?

Nic

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/