[c-nsp] Cisco VIP2-50+PA-2FE-TX second ethernet port bug

[Rodney Dunn]

On Fri, Apr 08, 2005 at 09:20:04AM -0400, Jon Lewis wrote:
> > On Fri, Apr 08, 2005 at 09:43:24AM +0200, Gert Doering wrote:
> > > Hi,
> > >
> > > On Thu, Apr 07, 2005 at 07:37:32PM -0700, Chris Cappuccio wrote:
> > > > Does anyone have the bugid for the bug where turning on the second
> > > > ethernet port on a PA-2FE-TX crashes the VIP2-50 that its in, and
> > > > ultimately causes the rest of the router to start to fuck up????
> > >
> > > You're experiencing this as well?  Great, it means "I'm not alone".
> > >
> > > I don't have a BugID, unfortunately, as the box in question doesn't
> > > have a Smartnet contract anymore.
> 
> Doesn't a 7500 do a bus reset and memory recarve when a "new interface"
> gets unshut?  If that's where its crashing, have either of you tried
> turning up the second port by loading a config into startup-config that
> has both ports unshut, and then rebooting?

No I'm pretty sure that's only when the MTU is changed so that
you have to recarve MEMD.

There was something similar for one of the channelized PA's
when you created the channel-group it would recarve MEMD but
we changed that.

Rodney

> 
> ----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/