[c-nsp] Cisco VIP2-50+PA-2FE-TX second ethernet port bug

[Jon Lewis]

On Fri, 8 Apr 2005, Rodney Dunn wrote:

> > Doesn't a 7500 do a bus reset and memory recarve when a "new interface"
> > gets unshut?  If that's where its crashing, have either of you tried
> > turning up the second port by loading a config into startup-config that
> > has both ports unshut, and then rebooting?
>
> No I'm pretty sure that's only when the MTU is changed so that
> you have to recarve MEMD.
>
> There was something similar for one of the channelized PA's
> when you created the channel-group it would recarve MEMD but
> we changed that.

I thought I remembered it happening when turning up the second interface
on PA-2T3 cards.  It's been a while since I've had to deal with turning up
DS3s on a 7500 though.

----------------------------------------------------------------------
 Jon Lewis                   |  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________