[c-nsp] Cisco VIP2-50+PA-2FE-TX second ethernet port bug

[Rodney Dunn]

On Fri, Apr 08, 2005 at 09:58:17AM -0400, Jon Lewis wrote:
> On Fri, 8 Apr 2005, Rodney Dunn wrote:
> 
> > > Doesn't a 7500 do a bus reset and memory recarve when a "new interface"
> > > gets unshut?  If that's where its crashing, have either of you tried
> > > turning up the second port by loading a config into startup-config that
> > > has both ports unshut, and then rebooting?
> >
> > No I'm pretty sure that's only when the MTU is changed so that
> > you have to recarve MEMD.
> >
> > There was something similar for one of the channelized PA's
> > when you created the channel-group it would recarve MEMD but
> > we changed that.
> 
> I thought I remembered it happening when turning up the second interface
> on PA-2T3 cards.  It's been a while since I've had to deal with turning up
> DS3s on a 7500 though.

I've never seen that.

> 
> ----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________