[c-nsp] enhanced object tracking

[CLAEREBOUDT Elke]

Hi,

I have 2 internet routers configured in HSRP who are connected via
ethernet switches (and an atm cloud).
Each router has a default route to internet and they also have a
point-to-point pvc between them.
The public subnet which should be reached coming from internet is the
directly connected LAN, so no routing needs to be done on the routers.

Problem is when the uplink between the ethernet switch and the atm cloud
goes down, the ethernet of the router stays up and it will keep sending
traffic on the wire, which will go  nowhere.
Is there a solution (some sort of ip address tracking) which will change
the routing (except of dynamic routing ofcourse) ?

Thx

elke




*****DISCLAIMER*****

This electronic transmission (and any attached document) is intended 
exclusively for the person or entity to whom it is addressed and may 
contain confidential and/or privileged material. 
Any disclosure, copying, distribution or other action  based upon 
the information by persons or entities other than the intended recipient
is prohibited. If you receive this message in error, please contact the 
sender and delete the material from any and all computers. 
Mobistar does not warrant a proper and complete transmission of this
information, nor does it accept liability for any delays.

*****END OF DISCLAIMER*****