[c-nsp] 512MB in GRP?
Oliver Boehmer (oboehmer)
oboehmer at cisco.com
Sun Apr 24 02:26:20 EDT 2005
Grant A. Kirkwood <mailto:grant at tnarg.org> wrote on Sunday, April 24,
2005 12:35 AM:
> Oliver Boehmer (oboehmer) wrote:
>>> I'm seeing conflicting reports on whether GRP (non -B) works with
>>> 512MB kit installed. I realize it's not supported, but I've heard
>>> that it seems to be working for some people at least. If this is the
>>> case, any specific hardware rev or rommon to watch out for? Can
>>> anyone share their experience?
>>
>>
>> There are three type of GRP's around, watch for the 800-xxxx-yy
>> number reported in the "MAIN:" line in a "show diag <slot>" output:
>>
>> MAIN: type 19, 800-2427-01 is a GRP-A, only supports 256MB.
>> MAIN: type 19, 800-2427-02 is a GRP-B, only 256 MB DRAM option
>> orderable (at that time) MAIN: type 19, 800-2427-03 is a GRP-B with
>> option to go upto 512 MB.
>
>
> OK, this is related but different.
Why different?
> Been trying to figure this out for a while:
>
> sh diag 0
>
> SLOT 0 (RP/LC 0 ): Route Processor
> MAIN: type 19, 800-2427-02 rev C0
> Deviation: D006289
> HW config: 0xFF SW key: FF-FF-FF
> PCA: 73-2170-06 rev B0 ver 3
> Design Release 1.4 S/N CAB0424A1GX
> MBUS: MBUS Agent (1) 73-2146-07 rev B0 dev 0
> HW version 1.2 S/N CAB04239Z4A
> Test hist: 0xFF RMA#: FF-FF-FF RMA hist: 0xFF
> DIAG: Test count: 0xFFFFFFFF Test results: 0xFFFFFFFF
> FRU: Linecard/Module: GRP=
> Route Memory: MEM-GRP-512=
> MBUS Agent Software version 1.98 (RAM) (ROM version is 2.39)
> ROM Monitor version 2.2
> Primary clock is CSC 1
> Board State is IOS Running ACTIVE (ACTV RP )
> Insertion time: 00:00:04 (10w6d ago)
> DRAM size: 536870912 bytes
>
> Should this even work?
Yes, it is a -02 GRP-B, upgradable to 512MB, and since you're using a
2.2 rommon version, it will also be recognized. The fact that "GRP" is
reported is due to CSCeb69172 (see a previous email).
oli
More information about the cisco-nsp
mailing list