[c-nsp] defualt bandwidth range for Gig E interface on 3750 .

[Stephen J. Wilcox]

On Mon, 25 Apr 2005, Pete Templin wrote:

> Baldev Vaishnav wrote:
> > What is the default bandwidth range on an Gig E interface on 3750 .
> > if 2 interfaces are  down , down , we can see different interface bandwidth .
> > What is the value it takes by defalt on a Gig E interface .
> 
> What is the port speed SET to?  If auto, it reports the lowest speed it 
> can negotiate to, until it is up.

this is a gig port tho, not aiui 10/100/1000.. it only does 1000Mb

> > And since this interface is Gigabit range , why it shows the interface BW in Megabit range .
> 
> It's showing bandwidth in units of Kbps, which is behavior for Cisco. 
> As far as the interface BW being shown as 10Mb, it's most likely set to 
> speed auto.  See above.

in my reply i posted from an unconfigured gig port with no gbic in and i see it 
reported at 1gb

Steve