[c-nsp] Cat 6500 and counters

[Tim Stevenson]

Yes, quite right, thanks for the clarification. v9 is required for *export* 
of IPv6 flows. And, see the other replies relative to NDE and CPU impact...

Tim


At 02:29 AM 4/28/2005, Mohacsi Janos submitted:
>Hi
>
>
>
>On Wed, 27 Apr 2005, Tim Stevenson wrote:
>
>>There is no IPv6 NF support, it is on the roadmap. It requires NFv9, which
>>is not supported today. Both sup2 & sup720 support v5 NF for IPv4 unicast.
>
>Slight correction. There is IPv6 flow collection in the boxes, but you 
>cannot export them...
>Regards,
>      Janos Mohacsi



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.