[c-nsp] Adtran MX-2800 to PA-MC-T3

[Bill Wichers]

> Am I missing something? Should M23 work w/ M13?

M23 works for us:

sfld2core1#show cont t3 1/0/0 tab
T3 1/0/0 is up.  Hardware is 2CT3 single wide port adapter
  CT3 H/W Version: 0.2.2, CT3 ROM Version: 1.0, CT3 F/W Version: 2.5.0
  FREEDM version: 1, reset 0 resurrect 0
  Applique type is Channelized T3
  Description: T3 for T1 Aggregation
  No alarms detected.
  FEAC code received: No code is being received
  Framing is M23, Line Code is B3ZS, Clock Source is Internal
  Rx throttle total 54, equipment customer loopback
  INTERVAL      LCV   PCV   CCV   PES  PSES  SEFS   UAS   LES   CES  CSES
  11:34-11:41     0     0     0     0     0     0     0     0     0     0
  11:19-11:34     0     0     0     0     0     0     0     0     0     0
  11:04-11:19     0     0     0     0     0     0     0     0     0     0

This is on a CT3 provisioned through XO.

     -Bill


*****************************
Waveform Technology
Systems Engineer