[c-nsp] Cayt 6009 EOBC Error causing 16 port GIGe to Shutdown
Dan Benson
dbenson at swingpad.com
Tue Aug 2 12:39:10 EDT 2005
Yesterday I had an error on one of my Cat 6009's that cause a 16 port
GIGe card to go into power down state. I reseated the card with no
avail. After issuing a set module power up <mod> the line card came back
online and has been running ever sense. I have had many problems with
these cards much like this. I have been researching the issue on the
net and have not been about to come up with a reason for the outage.
Does anyone have insight into this? I am going to replace the card none
the less but would love to know if I am going to have to expect this
type of error on this platform in the future. Thanks much.. //db
Error in the Log:
8/1/2005,02:56:52: EobDetermineChannelMisbehavior:EOBC on module 2 is
faulty. Module powered down!
Show mod:
res1-as2-6009 (enable) sho mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
2 2 16 1000BaseSX Ethernet WS-X6416-GE-MT no ok
3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
Mod Module-Name Serial-Num
--- -------------------- -----------
1 SAD040304H6
15 SAD04010M66
2 SAD04030BH3
3 SAL0811WJBB
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ----------
-----------------
1 00-d0-d3-35-29-26 to 00-d0-d3-35-29-27 3.2 5.3(1) 6.4(13)
00-d0-d3-35-29-24 to 00-d0-d3-35-29-25
00-d0-00-68-88-00 to 00-d0-00-68-8b-ff
15 00-d0-d3-35-29-28 to 00-d0-d3-35-29-67 1.4 12.1(3a)E1 12.1(3a)E1
2 00-30-19-c5-70-b0 to 00-30-19-c5-70-bf 1.0 5.3(1) 6.4(13)
3 00-11-20-fe-d6-50 to 00-11-20-fe-d6-7f 6.8 5.4(2) 6.4(13)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine WS-F6K-PFC SAD0419058D 1.1
res1-as2-6009 (enable)
More information about the cisco-nsp
mailing list