[c-nsp] Trouble with a NM-2CT1-CSU module

[james edwards]

I have a NM-2CT1-CSU which is giving me fits. I cannot get it past Up/Down
state. If I plug the T-1  into
a WIC card on the same router I go Up/Up.

NM-2CT1-CSU is a PRI card but Cisco indicates it can do data & to config it
as a chanalized
T-1 card. I have tried HDLC, PPP, and FR to no luck.

Any ideas what I am doing wrong ?


Router with the NM-2CT1-CSU:

!
controller T1 1/1
 framing esf
 fdl ansi
 clock source internal
 linecode b8zs
 channel-group 0 timeslots 1-24
!
!
!
interface Serial1/0:0
 description T-1 to RR colo
 ip address 10.444.0.25 255.255.255.252
 ip pim dense-mode
 encapsulation frame-relay IETF
 no fair-queue
 frame-relay map ip 10.444.0.26 17 broadcast IETF
 frame-relay interface-dlci 17
!
!

Here is the other side:

!
!
interface Serial0/1
 description T-1 to SF main CO
 ip address 10.123.0.26 255.255.255.252
 encapsulation frame-relay IETF
 no fair-queue
 service-module t1 timeslots 1-24
 frame-relay map ip 10.444.0.25 17 broadcast IETF
 frame-relay interface-dlci 17



James H. Edwards
Routing and Security Administrator
At the Santa Fe Office: Internet at Cyber Mesa
jamesh at cybermesa.com  noc at cybermesa.com
http://www.cybermesa.com/ContactCM
(505) 795-7101