[c-nsp] 2099/tcp (h2250-annex-g)

Roy bandwidth.user at gmail.com
Fri Aug 5 12:36:10 EDT 2005


Church, Chuck wrote:

>Could this be a high reverse telnet line?  Not sure what numbers they
>start at on a 7200, but that'd be the 98th line on a 2500.  'Sh line'
>should tell you... 
>  
>
#sh line
   Tty Typ     Tx/Rx    A Modem  Roty AccO AccI   Uses   Noise  
Overruns   Int
     0 CTY              -    -      -    -    -      0      11     
0/0       -
     1 AUX   9600/9600  -    -      -    -    -      0       0     
0/0       -
*    2 VTY              -    -      -    -    1    164       0     
0/0       -
     3 VTY              -    -      -    -    1     20       0     
0/0       -
     4 VTY              -    -      -    -    1      1       0     
0/0       -
     5 VTY              -    -      -    -    1      1       0     
0/0       -
     6 VTY              -    -      -    -    1      1       0     
0/0       -

If it helps..

<snip>
line aux 0
 stopbits 1
<snip>

Thanks,

Roy


More information about the cisco-nsp mailing list