[c-nsp] Cisco 828 Memory Issue - fault or something else?

[Skeeve Stevens]

Anyone have an idea what would be the problem indicated by this error
output.

===============
Mar 1 09:56:49.535: %SYS-2-MALLOCFAIL: Memory allocation of 32768 bytes
failed from 0x80218EC8, alignment 0 
Pool: Processor Free: 15264 Cause: Not enough free memory 
Alternate Pool: None Free: 0 Cause: No Alternate pool 
-Process= "Virtual Exec", ipl= 0, pid= 113
-Traceback= 0x800C2A38 0x801F8CDC 0x80201430 0x80218ECC 0x8010016C
0x800FD32C 0x800FCF14 0x80195ED8 0x80195F20 0x801034A8 0x8019B2CC 0x800FD8C0
0x800CF28C 0x800CF9D8 0x80119D3C 0x8011A124 
===============

The router is handling a 1MB/1MB SHDSL with NAT and a site to site ipsec
tunnel.  It also has 10 incoming static PAT entries.

Seems like 32MB is enough to do what its doing. anyone have an idea?

Edited show ver output:

ROM: System Bootstrap, Version 12.2(1r)XE2, RELEASE SOFTWARE (fc1)
System image file is "flash:c828-k9osy6-mz.123-14.T3.bin"
Cisco C828 (MPC855T) processor (revision 0x201) with 31744K/1024K bytes of
memory.
Processor board ID JAD06480RRJ (3276682706), with hardware revision 0000
CPU rev number 5
1 Ethernet interface
1 ATM interface
128K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)


_______________________________________________________
Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
Website: www.skeeve.org  - Telephone: (0414) 753 383
Address: P.O Box 1035, Epping, NSW, 1710, Australia

eIntellego - skeeve at eintellego.net - www.eintellego.net
_______________________________________________________
I'm a groove licked love child king of the verse
Si vis pacem, para bellum