[c-nsp] IOS on 1811/1841

[Adam Greene]

Thanks Łukasz.

----- Original Message ----- 
From: "Łukasz Bromirski" <lbromirski at mr0vka.eu.org>
To: "Adam Greene" <maillist at webjogger.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Friday, August 12, 2005 5:31 PM
Subject: Re: [c-nsp] IOS on 1811/1841


> Adam Greene wrote:
>
> > Thanks just what I needed. Besides the additional flexibility that the
> > 1841's modularity provides, do you think an 1841 with a HWIC-4ESW would
> > offer any better performance than an 1811 with its integrated 8-port
switch?
>
> In terms of L3 SVIs no - both use routers CPU to do the job. In terms
> of L2 they're 100Mbit/s FD, but some traffic usually gets routed
> anyway, and You have to plan for it in terms of not overloading routers
> CPU.
>
> > I couldn't find any documentation on CCO suggesting that there would be
...
>
> It's just bigger (8x10/100 vs 4x10/100) and can support PoE with
> external power supply.
>
> -- 
> this space was intentionally left blank    |            Łukasz Bromirski
> you can insert your favourite quote here   |        lukasz:bromirski,net
> ---
> [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
System]
>
>

---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]