[c-nsp] Does Cisco 7304 series support RIP (v2 or v1 whatever) protocol ?

Saku Ytti saku+cisco-nsp at ytti.fi
Thu Aug 18 05:56:19 EDT 2005


On (2005-08-18 12:18 +0300), Andris Zarins wrote:
> Hi all, 
> 
>  
> 
> Silly question - does Cisco 7304 series support RIP protocol, whatever
> is it v1 or v2?

 Yes, it supports RIP.

> I have several 7304 boxes with different IOS versions and all of them
> allow to configure RIP, but there are no signs about RIP in
> configuration itself (show runn). Tried to find some info on CCO - BGP,

 Try to configure something under RIP before quitting configuration
mode.

> ISIS, EIGRP and OSPF are metioned as supported and configurable, but
> there is nothing about RIP .. It'd be somewhat crazy if they dont'
> support it... as RIP is good choice for MPLS VPNs. 

 I disagree for security, scalability, debuggability and
maintainability reasons. But I do understand that it could 
be acceptable compromise between spending more money to each CE.

-- 
  ++ytti


More information about the cisco-nsp mailing list