[c-nsp] IAD2431,IOS Upgrade
Andriy A. Yerofyeyev
andriy.yerofyeyev at gmail.com
Wed Aug 24 16:46:05 EDT 2005
Hi!
Have a strange problem with IAD2431 after unsuccessful IOS upgrade. IAD
crashed after boot.
We're trying tftpdnld , but , after downloading image , IAD crashed again.
Why do I have this crash ?
Kind regards.
Configuration Summary
(Virtual Configuration Register: 0x3822)
enabled are:
load rom after netboot fails
break/abort has effect
console baud: 115200
boot: image specified by the boot system commands
or default to: cisco2-c2400
------------------------
System Bootstrap, Version 12.2(15r)ZJ, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
FPGA readonly version:0020001E
FPGA upgrade version :00250025
Upgrade FPGA currently running
c2400 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80008000, size: 0xda8af0
Self decompressing the image :
###########################################################################################################################]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0003A4 0X00791F43 2 Framers and 2FE
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00A96AF3
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 11Mb.
Using 8 percent iomem. [11Mb/128Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 2400 Software (C2400-I6K9O3S-M), Version 12.4(3),
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 13:54 by hqluong
Image text-base: 0x60008FF4, data-base: 0x61766000
Unknown file system detected.
Use format command to format the card as DOS File System.
Or use erase command to format the card as Low End File System.
%ALIGN-1-FATAL: Corrupted program counter 00:00:08 UTC Fri Mar 1 2002
pc=0x0 , ra=0x60CC2B74 , sp=0x629DDB70
%ALIGN-1-FATAL: Corrupted program counter 00:00:08 UTC Fri Mar 1 2002
pc=0x0 , ra=0x60CC2B74 , sp=0x629DDB70
00:00:09 UTC Fri Mar 1 2002: TLB (load or instruction fetch)
exception, CPU signal 10, PC = 0x0
-Traceback=
$0 : 00000000, AT : 62720000, v0 : 00000000, v1 : 00000000
a0 : 00000000, a1 : 629DDC90, a2 : 629DDC40, a3 : 00000001
t0 : 00000000, t1 : 00000000, t2 : A0000000, t3 : 00000000
t4 : 00000231, t5 : 00000382, t6 : 40000000, t7 : 00000000
s0 : 62C1A798, s1 : 629DDC40, s2 : 62C1A648, s3 : 629DDC90
s4 : 00000000, s5 : 62C1A648, s6 : 629DDC90, s7 : 00000188
t8 : 629DDC84, t9 : 00000000, k0 : 3041E801, k1 : 30410000
gp : 62725B40, sp : 629DDB70, s8 : 6271DF8C, ra : 60CC2B74
EPC : 00000000, ErrorEPC : BFC00F2C, SREG : 3401E103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception
File flash:crashinfo_20020301-000009 Device Error :No such device
File slot0:crashinfo_20020301-000009 Device Error :No device available
File slot0:crashinfo_20020301-000009 Device Error :No device available
00:00:09 UTC Fri Mar 1 2002: TLB (load or instruction fetch)
exception, CPU signal 10, PC = 0x0
-Traceback=
$0 : 00000000, AT : 62720000, v0 : 00000000, v1 : 00000000
a0 : 00000000, a1 : 629DDC90, a2 : 629DDC40, a3 : 00000001
t0 : 00000000, t1 : 00000000, t2 : A0000000, t3 : 00000000
t4 : 00000231, t5 : 00000382, t6 : 40000000, t7 : 00000000
s0 : 62C1A798, s1 : 629DDC40, s2 : 62C1A648, s3 : 629DDC90
s4 : 00000000, s5 : 62C1A648, s6 : 629DDC90, s7 : 00000188
t8 : 629DDC84, t9 : 00000000, k0 : 3041E801, k1 : 30410000
gp : 62725B40, sp : 629DDB70, s8 : 6271DF8C, ra : 60CC2B74
EPC : 00000000, ErrorEPC : BFC00F2C, SREG : 3401E103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception
-Traceback=
=== Flushing messages (00:00:09 UTC Fri Mar 1 2002) ===
Queued messages:
*Mar 1 00:00:09.003: %SYS-3-LOGGER_FLUSHING: System pausing to ensure
console debugging output.
gtXtldConfig: NetGX0 is configured.
gtXtldBoot: NetGX0 is running.
hMW: Startup synchronization with NetGX0 succeeded
hMW: Created channel 1
hMW: Created channel 2
hMW: Registered callback for channel 2 on doorbell bit 1
gtXtldConnect: MW connection to NetGX0 established.
*Mar 1 00:00:08.971: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0
State changed to: Initialized
*Mar 1 00:00:08.971: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0
State changed to: Enabled hMW: Created channel 3
hMW: Created channel 4
hMW: Registered callback for channel 4 on doorbell bit 2
*** System received a Bus Error exception ***
signal= 0xa, code= 0x8, context= 0x6289e544
PC = 0x605c1658, Cause = 0x20, Status Reg = 0x34018002
System Bootstrap, Version 12.2(15r)ZJ, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
FPGA readonly version:0020001E
FPGA upgrade version :00250025
Upgrade FPGA currently running
c2400 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
PC = 0xbfc0d85c, Cause = 0x2000, Status Reg = 0x3041e803
rommon 1 > set
PS1=rommon ! >
TFTP_RETRY_COUNT=20
RANDOM_NUM=557557727
BSI=0
BOOT=flash:c2430-i6k9o3s-mz.124-3.bin,12;
?=0
IP_ADDRESS=172.16.1.113
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=172.16.1.1
TFTP_SERVER=10.10.10.10
TFTP_FILE=IAD2431/c2430-i6s-mz.123-14.T3.bin
TFTP_VERBOSE=2
CRASHINFO=crashinfo_FAILED
RET_2_RTS=
RET_2_RCALTS=
--
Best regards,
Andriy A. Yerofyeyev
Direct : 1-718-732-3803
More information about the cisco-nsp
mailing list