[c-nsp] IPSec aggregator - strange behaviour

[Oliver Boehmer (oboehmer)]

Sebastian,

this message points to some memory corruption, and the router reload
could also be due to this.. But without more information (show ver, show
stack), there is little we can do, you best open a case with TAC if you
can.

	oli

Sebastian <> wrote on Thursday, December 01, 2005 4:20 PM:

> HI,
> 
> I am working with an IPSec aggregator (this role play a
> 7206VXR/NPE-G1/256MB).
> 
> Sometimes (especialy when I force the aggregator to clear up all
> existing IKE and IPSec SAs) the router displays the following output:
> 
> *Dec  1 17:08:39.247: %SYS-2-CHUNKBADMAGIC:
>       Bad magic number in chunk header, chunk 0  data 66A7FDA8
>       chunkmagic 60836200  chunk_freemagic 0
> -Process= "Crypto Support", ipl= 4, pid= 137
> -Traceback= 0x606C9D40 0x60838E80 0x607636B0 0x609C7BE0 0x609C76E0
> 0x6277E398 0x627990A8 
> 
> What is strange, sometimes that output is all I see, but from time to
> time, just after that output, the routers reloads.
> 
> ps. the router is the test one, so the 256MB of RAM memory is not the
> real 
> problem here. I verified that there is still more that 100M of free
> mem. 
> 
> thanks for any help.
> Sebastian
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/