[c-nsp] Cisco 1841 sodimm upgrade?

[Chris Cappuccio]

Don't the 1800s take DDR RAM ?  Just get some quality, low-latency,
ECC DDR SODIMM sticks.  The 2800s appear to take full sized DDR...

Kristofer Sigurdsson [kristo at ipf.is] wrote:
> Hi,
> 
> You might want to check out MemoryX, they usually have prices about 25%
> of what you would pay for official Cisco memory.
> 
> http://store.yahoo.com/memx/mem1841256d.html
> 
> This is 256 MB for the 1841 for $799 - not exactly $100, but probably a
> lot less than you'd pay your local Cisco reseller.
> 
> On Thu, 2005-12-01 at 08:39 -0600, Tom wrote:
> > Has anyone discovered the DRAM type and requirements needed to upgrade the 
> > 1841?  I don't want to pay hundreds or thousands of $ for something that 
> > should be available for less than $100.
> > 
> > Please, no warranty warnings.  We are self insured.
> > 
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
"You were about to change the channel when God healed you" -- Benny Hinn