[c-nsp] IP Cef - Two T1s - getting full bandwidth download but not upload

[Jon Lewis]

On Tue, 6 Dec 2005, Bob Fronk wrote:

> I tried changing to load sharing per-packet, but got no different
> result.  So you are saying that I will have to change to MLPPP with
> Sprint, then add the load sharing per-packet?

No.  MLPPP does its own load sharing that will give you similar (but in 
some ways better) performance to cef per-packet.  If you look at the list 
archive, you'll see several recent discussions of this.

I see in your config, you do have cef enabled.  You might show ip 
interface and show int stats, just to make sure the the serials and FE 
really are doing cef.  I don't know why per-packet wouldn't work unless 
cef wasn't really being used.

I doubt it's the problem, but you appear to be doing different queueing on 
the two serial interfaces.

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________